Do you need to include a photo for your quilt that looked more like area of the fabric than an iron-on decal?
Before, we used photo transfer paper to iron our photo onto our quilt block. Have you heard about direct-to-garment printing? It’s a fantastic new way of getting your preferred photo from the scrapbook and to your quilt block.
Direct-to-garment (DTG) printing is a form of digital printing. Having a expense of about $20,000, it’s not practical to work out and purchase your very own DTG printer. The normal price for coffee printer is $8 to $10.
This method is a touch more expensive compared to traditional photo transfer method. That’s partially as the technology is very new. Should you do plan to use a DTG photo on your memory quilt block, there are many factors to consider in selecting the printer who will carry out the meet your needs:
1. Make certain you will find no chemicals necessary to pre-treat your fabric first. Some DTG printers create an image that may be much more like screen printing. You don’t want that appear or feel on the quilt. The ink will be hard on the top of the fabric and will eventually (sometimes much earlier than later) will start to crack and wear with washings. Ask your prospective printer to view a sample of something they’ve printed. When you can have the ink is raised higher than the surface in any way whatsoever, it’s probably a sublimation type process which requires chemicals to pre-treat the fabric.
2. Use a type of digital DTG printing offered by the Brother GT 541. There are actually no chemicals found it necessary to pre-treat the material. The inks bond using the natural fibers and so are heat cured to set the image. The inks are water based, which will help leave a soft yet crisp image on the fabric.
There are several downfalls to using uv printer in your quilt blocks. One pitfall is color limitations. Since DTG printing can be a form an electronic printing, there is not any white ink. White is the lack of color. This means that you cannot print a photograph on dark blue or black fabric.
Digital garment or fabric printing is a CMYK format – cyan, magenta, yellow, and black. You can mix those colors to acquire a full spectrum of accurate colors – hardly white. You can find DTG printers that print white ink, but many of the require chemical pre-treatments for the material and may give you that thick surface print.
You should work with a light colored or neutral fabric and it needs to be cotton or possibly a cotton blend. The fabric must be capable of withstand 350 degrees for roughly 30 seconds. If you are not 09dexypky with one hundred percent cotton or even a 50/50 blend, ask your printer if the fabric will continue to work.
Size of your print may be a limitation. Most DTG printers use a printing field up to 14 inches x 16 inches. For most quilters, that size range won’t be described as a problem.
And talking about printing fields, here’s a hint. Most direct to garment printer charge for any 14×16 surface. If your blocks will allow 2 or 3 photos to fit within that range, you can get every one of them printed for the buying price of one. Consult with the printer to see if it’s possible along with your particular project.
Like the majority of technological advances, the price of digital garment (or fabric) printing will most likely decrease over time. Maybe it would be available on smaller printers for home and private use. For the time being, see if you can look for a DTG printer for your forthcoming photo quilt project. The outcomes may be like custom fabric, that will be an excellent touch for the original quilt!